Skip to main content

Posts

Showing posts from June, 2013

Computer Acronyms

--- A --- ADSL - Asymmetric Digital Subscriber Line AGP - Accelerated Graphics Port ALI - Acer Labs, Incorporated ALU - Arithmetic Logic Unit AMD - Advanced Micro Devices APC - American Power Conversion ASCII - American Standard Code for Information Interchange ASIC - Application Specific Integrated Circuit ASPI - Advanced SCSI Programming Interface AT - Advanced Technology ATI - ATI Technologies Inc. ATX - Advanced Technology Extended --- B --- BFG - BFG Technologies BIOS - Basic Input Output System BNC - Barrel Nut Connector --- C --- CAS - Column Address Signal CD - Compact Disk CDR - Compact Disk Recorder CDRW - Compact Disk Re-Writer CD-ROM - Compact Disk - Read Only Memory CFM - Cubic Feet per Minute (ft3/min) CMOS - Complementary Metal Oxide Semiconductor CPU - Central Processing Unit CTX - CTX Technology Corporation (Commited to Excellence) --- D --- DDR - Double Data Rate DDR-SDRAM - Double Data Rate - Synchronous Dynamic Random Access Mem...

Changing Default Location For Installing Apps

Change The Default Location For Installing Apps ----------------------------------------------- As the size of hard drives increase, more people are using partitions to separate and store groups of files. XP/ 7,8 uses the C:\Program Files directory as the default base directory into which new programs are installed. However, you can change the default installation drive and/ or directory by using a Registry hack. Go to :- - Start > Run - Type “regedit” (without “” NOOBS!) - Go to this directory… HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion - Look for the value named ProgramFilesDir. by default,this value will be C:\Program Files. Edit the value to any valid drive or folder and Windows will use that new location as the default installation directory for new programs. Wait for my next post...and dont forget to subscribe..

All About Movie Tags...

Hii Friends,  I am back after a long gap.. this is some piece of information i fetched which i thought would be nice if i share. CAM - A cam is a theater rip usually done with a digital video camera. A mini tripod is sometimes used, but a lot of the time this wont be possible, so the camera make shake. Also seating placement isn't always idle, and it might be filmed from an angle. Sound is taken from the onboard microphone of the camera, and especially in comedies, laughter can often be heard during the film. Due to these factors picture and sound quality are usually quite poor, but sometimes we're lucky, and the theater will be fairly empty and a fairly clear signal will be heard. TELESYNC (TS) - A telesync is the same spec as a CAM except it uses an external audio source (most likely an audio jack in the chair for hard of hearing people). A direct audio source does not ensure a good quality audio source, as a lot of background noise can interfere. A lot of the times a...